Ring Size Guide
US & Canada Ring Sizes
| US Size | Diameter (mm) | Circumference (mm) |
|---|---|---|
| 3 | 14.1 | 44.2 |
| 3.5 | 14.5 | 45.5 |
| 4 | 14.9 | 46.8 |
| 4.5 | 15.3 | 48.0 |
| 5 | 15.7 | 49.3 |
| 5.5 | 16.1 | 50.6 |
| 6 | 16.5 | 51.9 |
| 6.5 | 16.9 | 53.1 |
| 7 | 17.3 | 54.4 |
| 7.5 | 17.7 | 55.7 |
| 8 | 18.2 | 57.0 |
| 8.5 | 18.6 | 58.3 |
| 9 | 19.0 | 59.5 |
| 9.5 | 19.4 | 60.8 |
| 10 | 19.8 | 62.1 |
| 10.5 | 20.2 | 63.4 |
| 11 | 20.6 | 64.6 |
| 11.5 | 21.0 | 65.9 |
| 12 | 21.4 | 67.2 |
UK & Australia Ring Sizes
| UK Size | Diameter (mm) | Circumference (mm) |
|---|---|---|
| F | 14.1 | 44.2 |
| G | 14.5 | 45.5 |
| H | 14.9 | 46.8 |
| I | 15.3 | 48.0 |
| J | 15.7 | 49.3 |
| K | 16.1 | 50.6 |
| L | 16.5 | 51.9 |
| M | 16.9 | 53.1 |
| N | 17.3 | 54.4 |
| O | 17.7 | 55.7 |
| P | 18.2 | 57.0 |
| Q | 18.6 | 58.3 |
| R | 19.0 | 59.5 |
| S | 19.4 | 60.8 |
| T | 19.8 | 62.1 |
| U | 20.2 | 63.4 |
| V | 20.6 | 64.6 |
| W | 21.0 | 65.9 |
| X | 21.4 | 67.2 |
European Ring Sizes
| EU Size | Diameter (mm) | Circumference (mm) |
|---|---|---|
| 44 | 14.1 | 44.2 |
| 45 | 14.5 | 45.5 |
| 46 | 14.9 | 46.8 |
| 48 | 15.3 | 48.0 |
| 49 | 15.7 | 49.3 |
| 50 | 16.1 | 50.6 |
| 52 | 16.5 | 51.9 |
| 53 | 16.9 | 53.1 |
| 54 | 17.3 | 54.4 |
| 56 | 17.7 | 55.7 |
| 57 | 18.2 | 57.0 |
| 58 | 18.6 | 58.3 |
| 60 | 19.0 | 59.5 |
| 61 | 19.4 | 60.8 |
| 62 | 19.8 | 62.1 |
| 63 | 20.2 | 63.4 |
| 65 | 20.6 | 64.6 |
| 66 | 21.0 | 65.9 |
| 67 | 21.4 | 67.2 |
Japanese Ring Sizes
| JP Size | Diameter (mm) | Circumference (mm) |
|---|---|---|
| 4 | 14.5 | 45.5 |
| 5 | 14.9 | 46.8 |
| 6 | 15.3 | 48.0 |
| 7 | 15.7 | 49.3 |
| 8 | 16.1 | 50.6 |
| 9 | 16.5 | 51.9 |
| 10 | 16.9 | 53.1 |
| 11 | 17.3 | 54.4 |
| 12 | 17.7 | 55.7 |
| 13 | 18.2 | 57.0 |
| 14 | 18.6 | 58.3 |
| 15 | 19.0 | 59.5 |
| 16 | 19.4 | 60.8 |
| 17 | 19.8 | 62.1 |
| 18 | 20.2 | 63.4 |
| 19 | 20.6 | 64.6 |
| 20 | 21.0 | 65.9 |
| 21 | 21.4 | 67.2 |
Find Your Ring Size
Measure Your Finger
- Use a flexible measuring tape or length of string.
- Wrap it around the finger you'll wear your ring on. If you're creating a ring stack, consider where on your finger the ring will sit. If using string, mark the point on the string where the ends meet with a pen.
- Lay the string on a flat surface and use a ruler to measure the length (in inches or millimeters) up to the mark. Compare your measurement to the size chart to determine your ring size. If you are between sizes, opt for the larger size.
Measure an Existing Ring
- Choose a ring that already fits your finger well.
- Measure the interior diameter of the ring in millimeters (mm).
- Use the measurement chart to match the size of your ring to the closest size in mm. The interior of the ring should align with the outer edge of the circle.
Luther's At Your Service
There's no question too small or request too large for Luther's Diamonds client advisors. From choosing an engagement ring or gift to providing in-store or virtual appointments, we're always at your service.
A band built to nest.
the Chevron Twist is a contour band — its soft V curves up around your engagement ring and sits flush with no gap, and its point is happiest beneath an elongated stone, tracing the line of an oval or marquise. These are the rings it was made to nest with.
Watch how your band is made.
Your birthstone isn't hung from a setting or perched on top — it's seated directly into the band itself, by hand, in our family workshop. These are the stages every inlay band passes through before it reaches your door.
Grinding the Band
Once your band is cast in its rough form, every surface is ground down by hand to reveal its true shape and width — the same patient first step behind every ring that leaves our workshop.
Setting the Inlay
This is the slow part — and the part we refuse to rush. Your birthstone is set into the band by hand, the metal micro-hammered around it bead by bead until the stone sits flush and locked in place. A single inlay takes two to three hours of close, careful work.
Hand Polished
Your birthstone isn't hung from a setting or perched on top — it's seated directly into the band itself, by hand, in our family workshop. These are the stages every inlay band passes through before it reaches your door.
The Finished Band
The result: a genuine stone fused into the band itself, flush and seamless, close to you for a lifetime. Jack checks each one — stone seat, polish, and comfort — before it ever leaves the workshop.
